Honeywell Flame Detector-LG1093AA36

Flame Detector

Brand: Honeywell

Part Number: LG1093AA36

Technical Details 

• Honeywell Gas Turbine Flame Monitoring Systems
• The Honeywell LG/EG flame monitoring system detects the UV radiation emitted by a hydrocarbon flame and produces an output signal to indicate a flame or noflame condition. This system has delivered
• proven performance on General Electric (and GE licensee) gas turbines for more than 35 years.
• Geiger Mueller-type sensor phototube. Detects UV radiation in the 180..260 nm range of the spectrum. Solar blind and tolerant to black body radiation.
• Two-year shelf-life, 10000h MTBF with over one billion (109) operating hours.
• Gas turbines for power generation and compressors
• Temperature range: -40...176C
• Hardware outputs: For EG1033 amplifier modules only
• EG1033AA: Transistor open collector
• EG1033AB and EG1033AC: Relay contacts (SPDT)
• Features: High sensitivity with fast Flame Present Response Time (0.1 sec typical)
• Flame Loss Response Time: 0.2 sec max.
• Amplifiers support multiple voltage requirements: 28 Vdc, 20-35 Vdc, and 115 Vac.
• Operating distances up to 330 m (1000 ft), sensor to amplifier.
• Qualified component on General Electric turbines.
• Available with European Directive CE mark for EMC 89/336/EEC, LVD 73/23/EEC, and ATEX Explosive Atmosphere 94/9/EC (EEx d IIA T3 or EEX d IIC T3, Zones 1 and 2).
• Available with Factory Mutual approval for explosive atmospheres (Class I, Div 1 and 2, Groups B, C, and D).
• Note: Honeywell LG1093 series may not work like expected on GE/NP DLE gas turbines (Low-NOx). These need pre-selected LG1093's that are not available via Honeywell.
• Flame Sensor with 3/4 inch internal NPT mounting and Teflon shielded cable with 1" external conduit thread. Viewing window rated for 10 bar (150 psi).
• Model: Cable length: 61 feet (12.8 m)
• Supply voltage: no
• Approvals: CE/ATEX (EEx d IIA T3)
• UV Sensor Cross Reference: GE 261A1812P14